Kids Climbing Frame. With Wall & Net. Interchangable Apparatus

Kids Climbing Frame. With Wall & Net. Interchangable Apparatus
Kids Climbing Frame. With Wall & Net. Interchangable Apparatus
Kids Climbing Frame. With Wall & Net. Interchangable Apparatus
Kids Climbing Frame. With Wall & Net. Interchangable Apparatus
Kids Climbing Frame. With Wall & Net. Interchangable Apparatus
Kids Climbing Frame. With Wall & Net. Interchangable Apparatus
Kids Climbing Frame. With Wall & Net. Interchangable Apparatus

Kids Climbing Frame. With Wall & Net. Interchangable Apparatus

This is a substantial item with the main framework made from 96mm x 46mm pressure treated timber. It is bolted where appropriate to maintain structural strength and screwed elsewhere. It measures 179cm high (plus a further 2.5 cm with the grab knobs on the top), 159cm wide and 180cm long. It has been designed to enable maximum benefit from the structure in that the top and all 4 sides are used/usable as well as the inside. It is also designed with safety very much in mind as the structure when fully assembled is heavy enough and specifically shaped to provide great stability without being anchored into the ground.

Another main design feature is that of convenience because the rigid frame can be picked up and moved (minimum 2 VERY strong adults). An additional benefit is that the activity apparatus inside the frame and at each of the two open ends can be changed by simply unhooking the carabiner clips (each clip supporting up to 80kg). It would not be difficult to invent/add additional apparatus, or indeed to extend the basic framework lengthways. My grandkids would also like me to point out that they would also like to use it as a'den' had I thought to provide a cover.

This prompts me to also mention that it would be very easy to add a floor inside the frame by adding a further 6/7 1.8m decking boards and screwing these to the two cross-members that currently form the base. In any event, and lastly on the main design features, the existance of the two cross members that provide the base of the structure, also mean that the structure can be erected on almost any type of surface, hard or soft (including soft grass) and will never sink, or, in the case of some structures that have to be pegged/fixed down, won't suffer from working free of any base fixings - because none are required! The following apparatus is included. 1 Climbing Net 1.7m x 1.7m. 2 Climbing stones, multicoloured x20, made from poly-resin.

8 Pulley, seat and rope. Please note this last item is NOT designed specifically to be used with a climbing frame or as a glide pulley and should only be installed using caution and be fully safety tested before use. Any use should always be closely supervised. This means that the item is to be collected by you the customer, or your representative or your carrier (such as shiply.

Com), from my premises 10 miles East of Lincoln. By agreement in advance the item can be part assembled, or fully assembled or completely dissassembled when you collect. In line with your requirements, some basic instructions on assembly can be provided and , if requested, joints can be numbered with marker pen to assist re-assembly. The size of vehicle required will partly depend upon the state of assembly when being taken away, but if taken down to individual timbers, these are all a maximum of 1.8m in length.

If collection by a carrier is being arranged, we will assemble the timbers into 3 bundles and a further box with all the accessories, bolts and screws (none of the bundles/packages will exceed 60kg). PLEASE FEEL FREE TO MESSAGE ME WITH ANY QUESTIONS. The item "Kids Climbing Frame. Interchangable Apparatus" is in sale since Saturday, May 16, 2020.

This item is in the category "Toys & Games\Outdoor Toys & Activities\Climbing Frames". The seller is "copperwoodcraft" and is located in Lincoln. This item can be shipped to United Kingdom.


Kids Climbing Frame. With Wall & Net. Interchangable Apparatus